logo
Phone (972) 438-3774
Irving, Texas

Dwyer Differential Pressure Gauge P/N 2100 (Dwyer 2100)

( Item in stock! )Differential pressure gage, range 0-100" w.c., minor divisions 2.0.
Service:
Air and non-combustible, compatible gases. (Natural Gas option available.)
Note:
May be used with hydrogen. Order a Buna-N diaphragm. Pressures must be less than 35 psi.
Wetted Materials:
Consult factory.
Housing:
Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 hour salt spray corrosion test.
Accuracy:
±2% of FS (±3% on -0, -100PA, -125PA, -10MM and ±4% on -00, -60PA, -6MM ranges), throughout range at 70°F (21.1°C).
Pressure Limits:
-20 in Hg. to 15 psig. (-0.677 bar to 1.034 bar); MP option; 35 psig (2.41 bar), HP option; 80 psig (5.52 bar).
Overpressure:
Relief plug opens at approximately 25 psig (1.72 bar), standard gages only. See Overpressure Protection note on Catalog page.
Temperature Limits:
20 to 140°F.* (-6.67 to 60°C).
Size:
4" (101.6 mm) diameter dial face.
Mounting Orientation:
Diaphragm in vertical position. Consult factory for other position orientations.
Process Connections:
1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back.
Weight:
1 lb 2 oz (510 g); MP & HP 2 lb 2 oz (963 g).
Standard Accessories:
Two 1/8" NPT plugs for duplicate pressure taps, two 1/8" pipe thread to rubber tubing adapters and three flush mounting adapterswith screws. (Mounting and snap ring retainer substituted for three adapters in MP & HP gage accessories.)
Agency Approval:
RoHS. (Note: -SP models not RoHS approved.)
Dwyer Differential Pressure Gauge P/N 2100
Our Price : $75.00  ea
 

Manufacturers

Perry

 

Calibration Specialty based in the Dallas, Texas area provides professional aircraft calibration services, airline calibration services, airline tool calibration, avionics tool calibration, avionics equipment calibration, helicopter calibration services, Fluke mulitmeter repair, Starrett calibration services, Mitutoyo calibration services and on-site calibration repair services.